TES Skyrim 0.114 beta

[capncrunch]

@Maken1

Perhaps I'm a little late and you've already resolved this, but for anyone else that's having this issue (strange black grid/scanline overlay on the screen), change your iBlurDeferredShadowMask value back to normal (3) in skyrimprefs.ini. I had the same issue and it's gone now.
I'm pretty sure anyone who followed the nvidia tweak guide and modified that value will have trouble with some of the latest enb configs.

[Maken1]

@Maken1

Perhaps I'm a little late and you've already resolved this, but for anyone else that's having this issue (strange black grid/scanline overlay on the screen), change your iBlurDeferredShadowMask value back to normal (3) in skyrimprefs.ini. I had the same issue and it's gone now.
I'm pretty sure anyone who followed the nvidia tweak guide and modified that value will have trouble with some of the latest enb configs.

Hi capncrunch, how are you?
No man, you are not late im still dealing with it and others problems that are not because enb, its my system as well ( hardware limits ). Id minimized some the problem using more values on the " AmbientMinLevel " , something like +0.3 / 0.45 ( recommended from one user ) at cost of less effect.

Have you try more than 3 on the iBlurDeferredShadowMask? something like 5 or 7 ?

This happen if i use 5 or 7


and this is if i use 3 ( as you recommended as well )

more close you are, more detailed is the problem ( Boris already told about this problem ). In other hand in my case again even at mid range distance is still noticeable the problem ( using AmbientMinLevel=0.1 or 0.2 ).

IF you try more than 3, tell me how it was for you and try if you want AmbientMinLevel=0.45.

Thanks - greetings .

[DogStar]

@Maken1

Perhaps I'm a little late and you've already resolved this, but for anyone else that's having this issue (strange black grid/scanline overlay on the screen), change your iBlurDeferredShadowMask value back to normal (3) in skyrimprefs.ini. I had the same issue and it's gone now.
I'm pretty sure anyone who followed the nvidia tweak guide and modified that value will have trouble with some of the latest enb configs.

I'm already on 3 myself... my only chages to Skyrimprefs is using bFloatPointRenderTarget and bTreesReceiveShadows, with no other changes to shadows at all.... or anything else.

I also like AmbientMinLevel set @ 0.3 as going too high makes my shadows pale.

My solution for now is to use the earlier 0.114 dll.

[capncrunch]

@Maken1

Perhaps I'm a little late and you've already resolved this, but for anyone else that's having this issue (strange black grid/scanline overlay on the screen), change your iBlurDeferredShadowMask value back to normal (3) in skyrimprefs.ini. I had the same issue and it's gone now.
I'm pretty sure anyone who followed the nvidia tweak guide and modified that value will have trouble with some of the latest enb configs.

Hi capncrunch, how are you?
No man, you are not late im still dealing with it and others problems that are not because enb, its my system as well ( hardware limits ). Id minimized some the problem using more values on the " AmbientMinLevel " , something like +0.3 / 0.45 ( recommended from one user ) at cost of less effect.

Have you try more than 3 on the iBlurDeferredShadowMask? something like 5 or 7 ?

This happen if i use 5 or 7


and this is if i use 3 ( as you recommended as well )

more close you are, more detailed is the problem ( Boris already told about this problem ). In other hand in my case again even at mid range distance is still noticeable the problem ( using AmbientMinLevel=0.1 or 0.2 ).

IF you try more than 3, tell me how it was for you and try if you want AmbientMinLevel=0.45.

Thanks - greetings .

I can't see your images (you linked only to the thumbnails).

I tried 5 and 7 with the same results (the noticeable grid pattern problem). Messing with the ambient lighting settings seems that anything lower than .45 shows it, but anything .45 or higher does not (however shadows become far less pronounced).

At 3 I had ambient lighting set to .1 with no issues (I was using a shadowmask of 1 when I first noticed the problem).

[Maken1]

@Maken1

Perhaps I'm a little late and you've already resolved this, but for anyone else that's having this issue (strange black grid/scanline overlay on the screen), change your iBlurDeferredShadowMask value back to normal (3) in skyrimprefs.ini. I had the same issue and it's gone now.
I'm pretty sure anyone who followed the nvidia tweak guide and modified that value will have trouble with some of the latest enb configs.

I'm already on 3 myself... my only chages to Skyrimprefs is using bFloatPointRenderTarget and bTreesReceiveShadows, with no other changes to shadows at all.... or anything else.

I also like AmbientMinLevel set @ 0.3 as going too high makes my shadows pale.

My solution for now is to use the earlier 0.114 dll.

Hey +1 same here my friend.
Are you using 1 or 2 for FilterQuality ?

@capncrunch

Ohh crap :S sorry man, check out the previous pages, there is the images i was trying to show.
At 3 + ambient lighting .1 you are ok? Show one screenshot if you can.

After hours and hours of gettings new overclocking for my pc, gpus and for other hand tweaking the SSAO.. i have better results with my pc performance, not that great but at least its some better than before and about SSAO finally i found best settings that not cost me much performance drop and give me some quality i want.

[Selene]

I have just tried Opethfeldt ENB with V114beta.
I am using his Skyrim.ini and SkyrimPrefs.ini Settings too

Looks great but i have this kind of grid problem
Any idea how to fix this ?

[ENBSeries]

Use skyrimprefs.ini tweaked properly, instead of unknown experimental values. Or wait when i'll do noise filtering for case when it's disabled in skyrimprefs.ini

[Opethfeldt]

Selene: Try this earlier d3d9.dll http://www.filefactory.com/file/t46llrj5ek5/n/d3d9.dll

[Selene]

thanks
its not gone but better already

[Johnny5srv]

Thanks for the update. What are the possible quality parameters? Best to worst? 0,1,2? Any other configurable changes to that section?

[SKYLIGHTING]
Quality=1

Just a small request, when you add configurable parameters maybe include what's new in the readme .txt? That includes highest and lowest values for those parameters? Thanks.