First of all, a HUGE thanks to Sheson, I'm using the memory fix and have seen a massive decrease with CTD and freezing.
I have a high spec PC (4770k CPU, 16gb ram, 780 ti, SSDs etc) and really tempted to try UGRIDS7.
Has anyone here played through a fair bit of the campaign/story with the memory fix and UGRIDS7? Did you notice any quests screwing up (which I've read can be caused by increasing your UGRIDS)? Any other problems?
Has anyone used the Safe UgridsToLoad mod? Will this really allow me to try UGRIDS7 and go back to UGRIDS5 if I notice problems without breaking my save games?
Thanks again and sorry if these are newb questions, I'm very new to Skyrim (first play through!)
Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
- Author
- Message
-
Offline
- Posts: 4
- Joined: 18 Jan 2014, 23:53
-
Offline
- Posts: 39
- Joined: 08 Jan 2014, 14:59
- Location: Lyon, France
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
Skse.ini file needs to be created under <game folder>/data/SKSE/ for the memory patch to work as intended.Korgul wrote:Ok so I read that, and added the -forcesteamloader but now I don't have a SKSE.ini file? In fact I have no SKSE folder anymore in my data folder, its moved to documents/my games?thalixte wrote:Just take a look a this => viewtopic.php?f=13&t=2729&start=290#p46663Korgul wrote:Hey guys, I've worked on this all day yesterday and just can't get it right. I was hoping someone would help me with the Memory Patch.
I'm using a non-steam version of Skyrim, with SKSE 1.7.0 Alpha.
Can anyone help me out with what I have to do to get this to work with a non-steam version of the game? Every time I log out and check my memory log block 1 is still only 256mb.
Edit: Also do I have to download Memory Blocks Log? If so do I just install it with NMM or do I have to alter anything?
There is no reason to put it under My documents/My Games/Skyrim folder.
Memory Blocks Log is not necessary for the patch to work. It just helps you to know how much memory allocation for block1 and block2 TESV.exe really uses, so you can adjust skse.ini parameters accordingly.
-
Offline
- Posts: 39
- Joined: 08 Jan 2014, 14:59
- Location: Lyon, France
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
I use Ugrids7 since the early times of Skyrim (since december 2011), and i encountered no script problems with it. Unfortunately, i encountered some quest bugs, but that is just Bethesda's ones. Resolved with patches and USKP.Telmorial wrote:First of all, a HUGE thanks to Sheson, I'm using the memory fix and have seen a massive decrease with CTD and freezing.
I have a high spec PC (4770k CPU, 16gb ram, 780 ti, SSDs etc) and really tempted to try UGRIDS7.
Has anyone here played through a fair bit of the campaign/story with the memory fix and UGRIDS7? Did you notice any quests screwing up (which I've read can be caused by increasing your UGRIDS)? Any other problems?
Has anyone used the Safe UgridsToLoad mod? Will this really allow me to try UGRIDS7 and go back to UGRIDS5 if I notice problems without breaking my save games?
Thanks again and sorry if these are newb questions, I'm very new to Skyrim (first play through!)
-
Offline
- Posts: 4
- Joined: 18 Jan 2014, 23:53
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
Thanks thalixte. I'm going to give it a go. *cross fingers*
-
Offline
- Posts: 4
- Joined: 18 Jan 2014, 23:53
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
This might be a coincidence but I've been getting a weird problem since going to ugrids7. I was in Ragnvald dungeon and quite often when trying to loot dead enemies it would pick up the enemy like a telekinesis spell. If I keep clicking to loot it would loot it after 2-6 times.
Skyrim vanilla bug or ugrids7?
EDIT: Please ignore this post. As a Skyrim newb, I didn't know I could hold down the activate key to pick up items! I think coincidentally I was holding down the pickup/activate key too long and it was moving the enemies and not looting them. Doh!
Skyrim vanilla bug or ugrids7?
EDIT: Please ignore this post. As a Skyrim newb, I didn't know I could hold down the activate key to pick up items! I think coincidentally I was holding down the pickup/activate key too long and it was moving the enemies and not looting them. Doh!
-
Offline
- Posts: 4
- Joined: 12 Feb 2014, 14:53
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
neoh4x0r wrote:Right, I use steam for achievments, workshop, etc ... so I was not aware to the 'forcesteamloader' option (since I was not looking for it).thalixte wrote:That's right, if you have already create a shortcut to skse_loader.exe with the -forcesteamloader parameter.
However, as I stated before, there will never be a version of skse that is truly free of any and all steam code -- it does it by making the game think steam is running when actually it isn't.
However -- that too, is a moot point -- as they say: 'don't care how it works, as long as it works'
Can someone simplify this for me?
I use a cracked version as well (I already bought the game for xbox, but I want to mod)
Anyways, I followed Gophers video to a tee and I am still being capped at 256MB. I assume it has something to do with the fact that I don't use steam.
What exactly do I need to do to run SKSE Alpha w/ Memory Patch?
Something about "forcesteamloader" but I am not sure what to do.
Please help. Thank you
-
Offline
- Posts: 95
- Joined: 18 Jul 2013, 00:00
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
SSME works on a non steam copy of Skyrim doesn't it?
-
Offline
- Posts: 37
- Joined: 21 Jan 2014, 14:52
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
It does and so does the new SKSE Alpha build.vamp wrote:SSME works on a non steam copy of Skyrim doesn't it?
@MOONxo
Install SKSE Alpha as shown in Gophers movie.
Gopher runs Skyrim using Steam so he didn't tell/show an important step if you don't
- Create a shortcut to skse_loader.exe (right click on it and select copy to desktop)
- Right click on the shortcut on your desktop you just made and select properties
- Under target it shows something like "<path to your skyrim installation folder>\<main skyrim folder name> (where the TESV.exe is located)\skse_loader.exe"
- type -forcesteamloader at the end of that line (don't forget the space between " and -)
On my GF computer the end result looks like this: "G:\Games\The Elder Scrolls V Skyrim\skse_loader.exe" -forcesteamloader
I think Gopher did explain the SKSE.ini part in his video so I'm not going to repeat that here.
Important!: from now on always start Skyrim using your newly created shortcut.
or... you can just download SSME and throw the files in the main Skyrim folder and be done with it.
_________________
Intel Core i7 4960X @ 4.2GHz | 32GB 1600MHz RAM | 2x Asus GeForce GTX TITAN SLI | 2x Samsung Pro EVO 512GB SSD | Dell U2711 27" Monitor |
Intel Core i7 4960X @ 4.2GHz | 32GB 1600MHz RAM | 2x Asus GeForce GTX TITAN SLI | 2x Samsung Pro EVO 512GB SSD | Dell U2711 27" Monitor |
-
Offline
- *sensei*
- Posts: 289
- Joined: 08 Dec 2012, 23:05
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
Tried SKSE alpha way on non-steam a couple days ago. That seemed crashy, dunno why. Some block settings were crashing Skyrim at start. And strange issues with other combinations of block settings.
_________________
i5 2500k@4.0ghz - 24Gb RAM - R9-290 4Gb Tri-X - SSD 240gb Intel 520 - Win7x64
i5 2500k@4.0ghz - 24Gb RAM - R9-290 4Gb Tri-X - SSD 240gb Intel 520 - Win7x64
-
Offline
- Posts: 37
- Joined: 21 Jan 2014, 14:52
Re: Skyrim Memory Patch - fixing ILS, uGrids CTD, freezes
She's not a die hard gamer that plays for hours a day but after about 8 hours playtime or so the standard 768/256 settings seems to work just fine without a single CTD so far.Uriel24 wrote:Tried SKSE alpha way on non-steam a couple days ago. That seemed crashy, dunno why. Some block settings were crashing Skyrim at start. And strange issues with other combinations of block settings.
Isn't it the new scripting engine part of SKSE 1.7 alpha that is causing you problems?
_________________
Intel Core i7 4960X @ 4.2GHz | 32GB 1600MHz RAM | 2x Asus GeForce GTX TITAN SLI | 2x Samsung Pro EVO 512GB SSD | Dell U2711 27" Monitor |
Intel Core i7 4960X @ 4.2GHz | 32GB 1600MHz RAM | 2x Asus GeForce GTX TITAN SLI | 2x Samsung Pro EVO 512GB SSD | Dell U2711 27" Monitor |