Okay, ONE last thing
In my enbeffect, I see //float EBrightnessV2=2.5; in post process 2. In the boris one, there's the same value, minus the //, in a slightly different spot, but still under postprocess 2.
Should I copy that over?
And I'm guessing I shouldn't be editing the stuff below "EXTERNAL PARAMETERS BEGINS HERE, SHOULD NOT BE MODIFIED UNLESS YOU KNOW WHAT YOU ARE DOING!!!"?
EDIT: Well, I certainly messed something up.
My whole screen is black, except a very thin L shaped white and red part from the bottom and right sides of the screen,
Here's the enbeffect.fx file:
http://www.mediafire.com/?4boayb3mhr5kuol
ALso, I should have ENABLE_FLIP_INT_EXT_FACTOR enabled, as I have .126, right?
Skyrim particle patch for ENB
- Author
- Message
-
Offline
- Posts: 81
- Joined: 04 May 2012, 23:40
Re: Skyrim particle patch for ENB
Actually it looks like the same mesh just in two Windhelm folders. Each mesh has the same exact date.mindflux wrote:Ah, damn. Thanks, I'll get it fixed.
-
Offline
- Posts: 28
- Joined: 25 Jan 2013, 21:50
Re: Skyrim particle patch for ENB
Sorry to add yet another reply, but the site won't let me use PMs.
I did what you suggested jawz, but none of the commands when changed seem to make a noticeable difference in game, whatsoever, regardless of if I have the flip line enabled.
Is there an ENB around that already has the water fix incorporated so I can skip all this, as I can't see to do it on my own.
I did what you suggested jawz, but none of the commands when changed seem to make a noticeable difference in game, whatsoever, regardless of if I have the flip line enabled.
Is there an ENB around that already has the water fix incorporated so I can skip all this, as I can't see to do it on my own.
-
Offline
- *blah-blah-blah maniac*
- Posts: 3137
- Joined: 27 Jan 2012, 13:42
Re: Skyrim particle patch for ENB
Updated with a compatibility patch for users of W.A.T.E.R. - thanks to SparrowPrince for the permission to fiddle with his files.
-
Offline
- Posts: 5
- Joined: 10 Feb 2013, 12:42
-
Offline
- *blah-blah-blah maniac*
- Posts: 3137
- Joined: 27 Jan 2012, 13:42
Re: Skyrim particle patch for ENB
Thanks, a really nice find. I'll get a fix added soon.
-
Offline
- *blah-blah-blah maniac*
- Posts: 3137
- Joined: 27 Jan 2012, 13:42
Re: Skyrim particle patch for ENB
Cannot reproduce. Which exterior mod are you using for Ivarstead? And which ENB binary?
-
Offline
- Posts: 5
- Joined: 10 Feb 2013, 12:42
Re: Skyrim particle patch for ENB
Well I'm using RLO + CoT. Season of Skyrim ENB with 0.145 file atm. Maybe that should be a problem because I found a lot glowing plants, doors. Season of Skyrim ENB uses 0.119 binaries still. I have no clue how to fix these things through the INI settings.
-
Offline
- *blah-blah-blah maniac*
- Posts: 3137
- Joined: 27 Jan 2012, 13:42
Re: Skyrim particle patch for ENB
Plants that glow in the shadows? I know the issue, but it's not easy to fix especially without breaking how the preset looks. Try lowering ambient lighting and/or increasing ambient lighting curve, also lower subsurface scattering to 0.0 or close to it for both night and day.
What mod are you using that alters Ivarstead? There's a lantern above the door that's not in the vanilla game.
What mod are you using that alters Ivarstead? There's a lantern above the door that's not in the vanilla game.
-
Offline
- Posts: 5
- Joined: 10 Feb 2013, 12:42